Views: 35 Author: Site Editor Publish Time: 2020-09-12 Origin: Site
A panic bar is a type of door hardware used to allow occupants to exit a building quickly during an emergency. This device features a horizontal bar or push pad that releases the door's locking mechanisms with a single action. Rather than twisting levers to struggling with thumb turns or knobs, occupants can throw their weight into the device and release the door immediately. This type of device is useful in a panic type emergency, as it minimizes the risk of crowding or injury at the exits. It may also reduce the number of lives lost to fire or other emergencies.
For panic bars, you'll need the dimension from the face of the door stop (the bump-out part of a door frame) to the edge of the door where the lock is located. The panic bar should be about 1.5" shorter than this distance to provide operational clearance.
2.Choose your device carefully.
Most panic bars are available in either 3- or 4-foot lengths. The majority can be cut to fit a door, though this depends on the design of the exit device. The touch pad or bar of the device must be at least half as long as the total width of the door to meet most fire safety and emergency egress codes.
3.Select the function and trim.
An exit device may have an exit-only function, which means it will have no exterior trim that can be used for entering the building. Others may have a keyed cylinder on the exterior, as well as pull handles or lever trim.